PIN and Face Verification Method

When set, an employee must enter a PIN number before presenting their face to be able to clock In or Out.

When enrolling employee faces, take the following into consideration:

• Eyeglasses - It is recommended for the employee to enroll with eyeglasses for half of the process. For the second half, remove the eyeglasses and complete the registration.
• Hair Style - If the employee has a hair style that has their hair covering or blocking their eyes, the hair will need to be moved away from the eyes during the registration process.

Before enrolling an employee at the FR700/FR650, they must be set up in PayClock Online and updated to the clock.

1. At the FR700/FR650 clock press the Menu key. A clock administrator must present their face to access the functions menu.
2. Upon clock administrator verification the Functions Menu will display.
3. Press 2, the User Management Menu will display.
4. Press 2, the Modify User screen will display.
5. Use the numeric keys to enter the user number and press OK.  The employee's user number is the employee PIN in PayClock Online.
6. The employee's first name or a nickname that has been set up will display, press OK to continue.
7. With the employee standing at the ready, select the PIN and Face verification method.
8. Position the new so their face is in the middle of the two cameras with 9 to 25 inches between the face and the clock.
9. The image collecting screen will display, start the face recognition enrollment.
10. Perform 2 small head circles to the right.
11. Perform 2 small head circles to the left.
12. Move the face close to the clock until the white dashed square appears.
13. Move the face back until there is 9 to 25 inches between their face and the clock.
14. Turn the head fully to the right.
15. Turn the head fully to the left.
16. Raise the head up slightly.
17. Lower the head down slightly.
18. If you receive the message about adjusting your position, make sure to move the face back from the clock until there is 9 to 26 inches between the face and the clock.
19. The progress bar at the bottom of the screen will display the process of imaging.  Repeat any head movements done during enrollment as necessary until the process is complete.
20. When the face is registered and the clock displays Permit Open Door? press ESC.
21. When Permit Attendance? displays, press OK. You must press OK, otherwise punches will not be recorded for polling.
22. The screen will display Finished and will return to the Input User No. screen.  Continue with the next employee or keep pressing ESC until you return to the normal time/date screen.

Wed 12/05/2018